Frigen 113
1,1,2-Trichloro-1,2,2-trifluoroethane
CAS: 76-13-1
Molecular Formula: C2Cl3F3
Frigen 113 - Names and Identifiers
Frigen 113 - Physico-chemical Properties
| Molecular Formula | C2Cl3F3 |
| Molar Mass | 187.38 |
| Density | 1.575 |
| Melting Point | -36.4℃ |
| Boling Point | 47.6℃ |
| Water Solubility | 0.02 g/100 mL. Slightly soluble |
| Refractive Index | 0 |
| Physical and Chemical Properties |
Frigen 113 - Risk and Safety
| Hazard Symbols | N - Dangerous for the environment |
| Risk Codes | R52/53 - Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R59 - Dangerous for the ozone layer |
| Safety Description | S59 - Refer to manufacturer / supplier for information on recovery / recycling. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 1078/3082 |
Frigen 113 - Nature
Open Data Verified Data
colorless, odorless, transparent, volatile liquid. Flammable, does not decompose, does not corrode metals, low toxicity. Boiling point 47. 57 °c. Melting Point -35 °c. The critical pressure is 3.41MPa. The critical temperature is 214.1. The relative density was 1. 565. Refractive index 354. Viscosity (25 C) 0.68 MPA. s.
Last Update：2024-01-02 23:10:35
Frigen 113 - Preparation Method
Open Data Verified Data
1. Hexachloroethane by hexachloroethane method is reacted with hydrogen fluoride in the presence of antimony pentachloride as a catalyst, and the reaction product is subjected to alkali washing, water washing, fractionation and purification to obtain a finished product.
2. Tetrachloroethylene method
This method is an improvement on the production of hexachloroethane. The process is simplified, the yield is high, and the labor protection conditions are improved.
Last Update：2022-01-01 10:14:24
Frigen 113 - Use
Open Data Verified Data
mainly used as Polychlorotrifluoroethylene monomer, also used as refrigerant, cleaning agent, dry cleaning agent, foaming agent, fire extinguishing agent and solvent.
Last Update：2022-01-01 10:14:25
Frigen 113 - Safety
Open Data Verified Data
low toxicity. There is no explosion hazard. The maximum allowable concentration in air is 1000 × 10-6. When storing in an open container, a water seal is required.
Packed in 240L iron drum, 200kg per barrel. No direct contact with the flame. The hazardous materials shall be stored and transported according to the regulations.
Last Update：2022-01-01 10:14:25